Name

WaFLs Cap Cap (Set of 5)

Vendor SKU

WAF001

MSRP (USD)

4.99

MAP (USD)

4.99

Product Description

Are you tired of trying to solder wires on those pesky little capacitor leads? Step your builds up a notch with WaFLs Cap Cap. This tiny PCB sits on the bottom of most standard LOW ESR capacitors, and provides you with two easily accessible pads for quick and clean soldering to the capacitor. Whether you need to quickly swap a broken capacitor after a hard crash, or simply dont have enough room near your battery pads for your cap to cleanly rest, the Cap Cap makes attaching a wire to your capacitor simple, letting you mount it anywhere on your frame. Comes in a set of 5!

Example pictures show one unit attached to a Panasonic 1000uf 25v Capacitor, and 18 AWG Silicone wire. Capacitor and wires are not included. EDA by Olaf Hichwa.

Weight

0.24g (+/- 10%) per unit, 1.2g per set of 5 units (+/- 10%) (not including plastic bag)

Dimensions

Each unit is 10mm in Diameter (+/- 10%), and 1.6mm thick (+/- 10%)