3 Axis Brushless Gimbal SPECIFICATIONS

Use: Vehicles & Remote Control Toys

Upgrade Parts/Accessories: Frame

Tool Supplies: Tools

Technical parameters: Value 3

Remote Control Peripherals/Devices: Remote Controller

Recommend Age: 12+y,14+y

RC Parts & Accs: Brushless Gimbal

Origin: Mainland China

Model Number: 3 Axis Brushless Gimbal

Material: Metal

Four-wheel Drive Attributes: Motors

For Vehicle Type: Airplanes

Color: As picture shows

Brand Name: Readytosky

ReadyToSky is a professional manufacturer specializing in FPV (First-Person View) RC module accessories. For inquiries regarding wholesale or bulk purchases, please feel free to contact us.

RTF CNC FPV 3 Axis Brushless Gimbal W/ 2204 2805 Motor & Storm32 Controlller for DJI Phantom Walkera X350 Gopro 3 4 SJ4000 Xiaomixiaoyi

Features:
Color: blackAxis: 3axis gyroFlight controller:Storm32Motor : 2 pcs 2204 260kv & 1 pc 2805140kvBattery plug: JSTWeight: about 177.52gCompatible camera: Gopro 4,3,2 ; SJ4000 , Xiaomi xiaoyicamera( not included)compatiable frame :DJI Phantom 1 2 / Walkera X350
Strom32 Gimbal Controller
Features:
board color: bluemotor drivers in DFN packages: yeson-board MPU: yeson-board bluetooth module: noI2C plug type: picoblade (1.25mm JST)I2C#2 plug type: picoblade (1.25mm JST)pin headers: no
Included accessories:
MPU modulecable with connectors for MPU module
Points to note:
Firmware : 051
The pins on connector I2C#2 are reversed as with respect to connector I2CALL boards HAVE the diode required for running a bluetooth module!!!SPECIFICATIONS
supply voltage: 3s batterymotor current: max. 1.5 A per motorComment: This is not yet fully exploited, motors with resistances of 12 Ohm , motors with 10 Ohm may be handled with care (see here andhere).board dimensions: 50 mm x 50 mm, 45 mm bolt to bolt, holes 3 mm
Warm notice:
1. Recommended power supply is 12V(3s battery);2, Camera must be fixed in the head (without any loosening);3. Adjust the Gopro camera to the left or right,so that the camera is at Horizontal level;4. Beforecamera fixed in the gimbal , please do not push ” on ” button to have power.5,The gimbalcamera must be use belttight, otherwise it will have problems.And if you do this many times, it will cause damage to the flight controller.

– 1 x Aluminum gimbal installed 3 motors(assembled)– 1 x Gimbal controller (2 kinds of board send at random)– 1 x Sensor-3x servo wire(10cm)– Wiring( camera not included)