Thank you for purchasing this camera. Please read the manual carefully before using, and keep it in a safe place for future reference.

The contents covered in this manual is based on the latest information at the time of writing the manual. Due to the differences of technical development and production batches, it may be slightly different from your actual use. Please take the actual product features prevail.

Specification

Operation Guide

This camera is required to use a Micro SD high speed card (multimedia memory card) of U3 or higher.

Memory card instructions

If you are using a memory card for the first time, please make sure to format the memory card before using.

Please turn off the camera before inserting or removing the memory card.

How to use the memory card: Push the Micro SD card into the card slot until the card is fully inserted, as indicated by the battery on the bottom of the camera. To remove the SD card, gently press the end of the memory card inward and the memory card will pop up.

If the memory card is in one of the following conditions, the recorded data may be damaged:

– The memory card is not used properly.

– Turn off the power or remove the memory card during recording, deleting (formatting) or recognizing.

Product Features

>Real 4K@30fps video resolution, interpolated to 4K@60fps

>16MP Still picture

> 2.0 Touch screen, allowing the operation much easier

>Bundled with waterproof case can support underwater 30M, good option for shooting wonderful water sports.

> Support 2.4G remote controller

>Support GYRO Stabilization

> 3.7V/1050mAh battery

> Support Micro SD card up to 128G memory card

Product Diagram

1.Lens 2.WIFI Indicator 3.Power/ModeButton

4.OK/Record Button 5.Up Button 6.Down Button 7.Speaker 8.Charging Indicator 9.Working Status Indicator

10. LCD Screen 11.Micro USB 12. HDMI port

13. Micro SD card slot 14.Battery Cover 15. 1/4metal screw

Indicator

Button

Operation Diagram

1. Video mode icon 2. Video working time

3. Remaining video recording time of the micro SD card

4. Micro SD card icon 5. MIC on

6. Battery power information display 7. Playback

8. Camera mode options 9.Settings

10. Pause icon on video playback

11. Slide volume up and down on the right side of playback interface

12. Playback time display 13. Video iconon playback mode

14. Current files and total files quantity 15. Battery icon

16. Scroll left to select the files 17. Scroll right to select the files

18. Return to preview screen 19.Current file resolution

20. Delete the current file 21. Video setting

22. General Setting 23.Exit to live view interface

Picture Mode

1. Photo mode 2. Photo mode options

3. Photo Setting Menu 4. General Setting Menu

5. Exit

When in Video or photo preview interface, press and hold the OK/Record to enter into the following menu.

1. Mode Menu:You can select different Video mode or Photo Mode here;

It includes two parts: 5.Video Mode Menu; 6.PhotoMode Menu

2. Playback: For video or image preview

3. Setting: For different settings including video settings, picture settings and general settings.
4. Exit: Return backto preview screen

Shortcut mode

When the camera is on, slide down from the top of the screen andthe shortcut menu below will appear for quick operation.

1. WIFI setup 2.MIC setup 3.Screen Lock

4.Turn off 5.Exit 6. Slide to unlock

When camera is on, slide up from the bottom of the screenand the mode menu will appear for quick operation.

Connect to Computer

After the camera is connected to the computer and enters the removable disk mode, a removable disk will be added in the “My Computer” window. The captured photos or videos will be stored in the “DCIM/100MEDIA”directory. You can access this directory to copy files to your computer’s hard disk or playback the video/pictures directly.

Note: Do not disconnect the USB connection during the download of the file.

The memory card cannot be inserted or removed during USB connectionto avoid data loss.

WIFI App Connection

Thecameraallowsfullcontrol,livepreviewingandplaybackofphotos/videosonmostSmartphonesandTablets.
a.DownloadtheAppDVKING4KfromGooglePlayorfromtheAppleAppStore.
b.PressandholdtheUPButtonofthecameraaround3secondstoturnonWIFI, the “WIFI waiting icon” appears on the screen.
c.ActivateWIFIintheGeneralSetupMenuofyourmobilephone.
d.GototheWIFIsettingsonyourPhone,youwillseeActionCam_xxxxinthelistofavailableWirelessnetworks.
e.ConnectyourphonetotheActionCam_xxxxviaWIFI.ThedefaultWIFIPasswordforthedeviceis:1234567890.
f.OpentheappDVKING4Kthenyoucanoperatethecameraonyourmobilephoneortablet.

Important: Before connecting the camera via WIFI, you need to download theDVKing 4Kapp on your smart phone or tablet.

You can also scan the following QR code with your mobile phone:

Android App Download iOS App Download

The contents covered in this manual is based on the latest information at the time of writing the manual. Due to the differences of technical development and production batches, it may be slightly different from your actual use. Please take the actual product features prevail.