This 4″ E Ink RAW e-paper display has a vibrant and clear 600 x 400 pixel resolution and uses red, yellow, and blue as its primary colours. The new E Ink Spectra 6 technology improves the display, giving it high contrast and saturation, making images clearer and the colours brighter and more vivid. It has no backlight, which means it retains the last displayed content for long periods even when powered down. Its low power consumption means power is needed only during refreshes, which is great if you’re trying to save on energy.

The full refresh time is approximately 19 seconds, with a refresh power consumption of less than 70mW. Its wide viewing angle of over 170 gives clear visibility from different viewing angles. It comes with online development resources and a manual, including driver board circuit diagrams and examples for platforms like Raspberry Pi, Jetson Nano, RDK X3, Arduino, and STM32.

An e-Paper Raw Panel Driver HAT will be needed to run this display.You can find one in our store

Note: This is the Rawboard ONLY.If you are looking for this display with a driver board, click here to find it in our store.

Features

• E Ink Spectra 6 (E6) technology, featuring high contrast and high colour saturation
• No backlight, keeps displaying last content for a long time even when powered down
• Ultra-low power consumption, basically power is only required for refreshing
• Comes with online development resources and manual (driver board circuit diagram, examples for Raspberry Pi/Jetson Nano/RDK X3/Arduino/STM32)

Specifications

Operating Voltage 3.3V Connections 3-wire SPI, 4-wire SPI Outline Dimensions 99.00 x 66.00 x 0.85mm Display Size 84.6 x 56.40mm Dot Pitch 0.141 x 0.141mm Resolution 600 x 400 pixels Colour Display E6 Full Colour (E Ink Spectra 6) Grey Scale 2 Full Refresh Time 19s Refresh Power <70mW Standby Current of Raw Display <0.01uA (almost none) Viewing Angle >170

Package Contents

• 1x 4 Full-Colour Raw e-Paper Display