Arducam Pivariety is a camera solution for the Raspberry Pi which takes advantage of the Raspberry Pi hardware Image Signal Processor (ISP) functions. Using Arducam Pivariety camera modules, users can experience better performance and a wider variety of camera and lens options.

For a long time, Raspberry Pi users have been limited to closed-source officially supported camera drivers. Now Arducam has made it possible to provide well-tuned ISP for Pivariety camera modules with Auto Exposure, Auto White Balance, Auto Gain Control, Lens Shading Correction and more!

This Pivariety module uses a 21MP IMX230 Exmor RS colour sensor, offering up to 53444012@9 FPS. The module comes with a 150mm 15-pin FPC cable (1mm pitch), 150mm 15-pin to 22-pin FPC cable (0.5mm pitch) and an acrylic case with fixings.

The module comes with two FPC cables, one for your Pi 4/3/2 and another for your Pi Zero.

The packagenow includes two different FPC cables for use with different boards, including Pi 5 and Zero!

Features

• 21MP Sony IMX230 Exmor RS colour sensor, up to 53444012@9 fps
• Auto Exposure Control
• Auto White Balance
• Programmable focus control
• Gstreamer support
• Upcoming V4L2 support
• Compatible with all libcamera-based apps maintained by the RPi foundation

Specifications

• Pixel Size: 1.12um x 1.12um
• Optical Size: 1/2.4
• Active Pixels: 5344H 4016V
• Lens Spec: Focal length: 4.77mm, F.NO: 1.755%, FOV: horizontal 64deg
• IR Sensitivity: Integral IR filter, visible light only
• Focus Type: Motorized focus, programmable focus control
• Frame Rate: 53444012@9 fps, 38402160@10 fps, 25921944@15 fps, 26562004@30 fps, 19201080@30 fps, 1280960@120 fps, 1280720@120 fps, 640480@120 fps
• Output Format: Output image format of JPG, YUV420, RAW, DNG; output video format of MJPEG, H.264
• Sensor Output Format: RAW10
• ISP Output Format: Output image format of JPG, YUV420, RAW, DNG; output video format of MJPEG, H.264
• Interface Type: 2-Lane MIPI
• Board Size: 38x38mm

Resources

• Quick Start
• Getting started with Arducam IMX230 camera
• How to build the Raspberry Pi Kernel Driver
• 3D drawing
• User Guide
• Acrylic Bracket Assembly Guide

Package Contents

• 1 x Arducam 21MP IMX230 ISP Camera Module
• 1 x 150mm 15pin 1.0mm FPC cable (for Pi 4/3/2)
• 1 x 150mm 15pin 1.0mm to 22pin 0.5mm pitch FPC cable (for Pi 5 and Zero)
• 1 x Acrylic case kit with assembly accessories

Raspberry Pi not included