• Power Supply Voltage: 2.7V-3.3V
• Data Interface Level: 2.7-3.3V
• Backlight Power Supply Voltage: Highest 3.3V
• Module Size: 43.6mm x 43.1mm(width X height)
• Installation Diameter: 2mm

Description:

This is a quick tutorial for our 84×48 pixel monochrome LCD display. These displays are small, only about 1.5″ diameter, but very readable due and comes with a backlight. This display is made of 84×48 individual pixels, so you can use it for graphics, text or bitmaps. These displays are inexpensive, easy to use, require only a few digital I/O pins and are fairly low power as well. To drive the display, you will need 3 to 5 digital output pins (depending on whether you want to manually control the chip select and reset lines). Another pin can be used to control (via on/off or PWM) the backlight. To make things easy for you, we’ve written a nice graphics library that can print text, pixels, rectangles, circles and lines! The library is written for the Arduino but can easily be ported to your favourite microcontroller.

Specification:

• Power Supply Voltage: 2.7V-3.3V
• Data Interface Level: 2.7-3.3V
• Backlight Power Supply Voltage: Highest 3.3V
• Module Size: 43.6mm x 43.1mm(width X height)
• Installation Diameter: 2mm

Features:

• Brand new and high-quality product
• Low-cost monochrome graphical display
• Blue backlight
• Built-in PCD8544 Lcd controller
• 84 X 48 dots matrix
• Serial interface maximum of 4.0 Mbits/s
• CMOS compatible inputs
• Low power consumption suitable for battery operated systems
• Working voltage: 3V to 5V

Interfacing With Arduino:

Package Included:

1 x Nokia 5110 LCD Module