• Learning/Skill Level: (Beginner to Advanced / Master)
• With tutorial user manual containing PDF Lesson,code,Libraries,CD/DVD, and so on.
• All components compatible with Uno R3, can be used directly.
• Package includes: Individual components in retail box, starter guide and source code to be downloaded using the link provided in the kit, parts reference chart and list for easy identification.

Description :

• Learning/Skill Level: (Beginner to Advanced / Master)
• With tutorial user manual containing PDF Lesson,code,Libraries,CD/DVD, and so on.
• All components compatible with Uno R3, can be used directly.
• Package includes: Individual components in retail box, starter guide and source code to be downloaded using the link provided in the kit, parts reference chart and list for easy identification.

Package Included :

• 1 x Uno R3 Compatible Board
• 1 x USB cable
• 1 x 830 Tie Points Breadboard
• 10 x 5mm Red LEDs
• 10 x 5mm Green LEDs
• 10 x 5mm Yellow LEDs
• 10 x 5mm Blue LEDs
• 1 x 5mm RGB LED
• 5 x Push Button with Cap
• 10 x 220 ohm Resistor
• 10 x 1k ohm Resistor
• 10 x 10k ohm Resistor
• 1 x Photo resistance
• 1 x Remote
• 1 x Tilt Switch
• 2 x Buzzer module
• 1 x 10k potentiometer
• 1 x MAX7219 Chip
• 1 x74HC595 Shift Register
• 1 x LM35 Temperature Sensor
• 1 x Water Lever Sensor
• 1 x Stepper Motor
• 1 x Stepper Motor Driver Board
• 1x Servo motor
• 1 x dc motor with fan
• 1 x DC motor driver module L293D
• 1 x 1602 LCD display
• 1 x 4 Digital tube
• 1 x 7 segment display
• 1x 4*4 Keyboard Module
• 1 x RTC module
• 1 x RC-522 RFID module
• 1 x Ultrasonic Module
• 1 x PIR Motion Sensor
• 1 x IR Receiver Sensor
• 2 x Diode(1N4007)
• 2 x Npn transistor BC547
• 2 x Pnp transistor BC557
• 1 x ESP8266-01
• 1 x ESP8266 Pin Board Adapter Module
• 1 x Soil moisture sensors
• 1 x Magnetic Reed Switch
• 1 x Mini Load cell
• 1 x Hx711 ADC Module
• 1 x Laser Module 650NM 5V
• 1 x TTP223B Touch Key Sensor Module
• 1 x MQ-135 Gas Sensor Module
• 1 x OLED 0.96″ I2C 128 X 64 Display Module
• 1 x Infrared Sensor
• 2 x Capacitor 47uF
• 2 x Capacitor 220uF
• 2 x Capacitor 100nF
• 1 x Battery Holder
• 40pcs x jumper wires(F-F)
• 40pcs x jumper wires(M-F)
• 40pcs x jumper wires(M-M)
• 1 x 9V Battery Holder
• 1 x 2.54mm Elbow 40 Pin Header
• 1 x 2.54mm Straight 40 Pin Header
• 1 x Breadboard Power Supply Module
• 1 x 170 Tie Point Mini Breadboard
• 1 x UNO R3 Ethernet shield with all 37 Sensor kit