Small OLED modules are a popular option for adding a simple display to your project for monitoring data, displaying IP addresses, weather, counters or anything else you decide to code!

This 0.96″ module is small, lightweight and features a convenient horizontal pin header for wiring up to your microcontroller.

The convenient mounting holes make it easy to embed this display to a custom enclosure for your project.

Resources

• Product Wiki and user guide
• Code examples

Tech Specs

DRIVER CHIP SSD1306 INTERFACE 3-wire SPI, 4-wire SPI, I2C RESOLUTION 128*64 DISPLAY SIZE 0.96inch COLORS 1/4 yellow section, 3/4 blue section VISIBLE ANGLE >160 OPERATING TEMP. () -20~70 STORAGE TEMP. () -30~80 OPERATING VOLTAGE 3.3V / 5V APPLICABILITY Hardware platforms such as Raspberry Pi/Jetson Nano/Arduino/STM32

Interface

PIN NO. SYMBOL DESCRIPTION 1 VCC Power positive (3.3~5V power input) 2 GND Ground 3 NC NC 4 DIN Data input 5 CLK Clock signal input 6 CS Chip selection, low active 7 D/C Command signal, low level for command, high level for data 8 RES Reset signal, low active

Hardware Configuration

MODE/INTERFACE BS0/BS1 DIN SCK 3-wire SPI 1/0 MOSI SCLK 4-wire SPI 0/0 I2C 0/1 SDA SCL