This 1.69″ LCD IPS module is a great way to add a small display to your project.

The display has a 240×280 resolution, and offers 262K RGB colours, to give a clear and vibrant display. The module is controlled via a simple 4-wire SPI interface thanks to the embedded ST7789V2 driver.

The handy mounting holes make it easy to incorporate into a custom panel or 3D printed enclosure, and the online development resources make it easy to get up and running on a Raspberry Pi, Arduino board, and an STM32.

A GH1.25 20cm 8-pin cable is included, ready to connect to your favourite microcontroller.

Connection Example: 1.69inch LCD Display Module connected to the Raspberry Pi

Features

• 240280 resolution, 262K colours, clear and colourful displaying effect
• SPI interface, minimizes required IO pins, supports controller boards like Raspberry Pi/Arduino/STM32
• Comes with online development resources (examples for Raspberry Pi/Arduino/STM32)

Specifications

Operating Voltage 3.3V / 5V Communication Interface 4-wire SPI Display Panel IPS Driver ST7789V2 Resolution 240 280 pixels Display Size 27.97 32.63mm Pixel Size 0.11655 0.11655mm Module Size 31.50 39.00mm

Resources

• Product Wiki

Pinout

VCC Power (3.3V / 5V input) GND Ground DIN SPI data input CLK SPI clock input CS Chip selection, low active DC Data/Command selection (high for data, low for command) RST Reset, low active BL Backlight

Package Contents

• 1x 1.69″ LCD Module
• 1x GH1.25 20cm 8-pin cable