1pcs JMT 30A Brushless ESC Speed Controller For DIY FPV RC Quadcopter Hexacopter Multi-Rotor Aircraft Trex 450 Helicopter

• This ESC do not have the English instruction.
• Before producing, the manufacturer have set up the program, the ESC do not need additional program.

JMT 30A Brushless ESC Speed Controller For RC RC Quadcopter Hexacopter Multi-Rotor Aircraft

Specification:

weight: 25 g

Input voltage:2-4S

Working current:30A

BEC output: 5V 2A

Quantity: 1 pcs

2Features

2.1Safety Arming Feature: Regardless the throttle stick position, the motor will not spin after battery connected.

2.2Throttle Calibration:Throttle range can be configured to provide best throttle linearity, fully compatible with all market available transmitters.

2.3Programmable Items: Brake Setting: brake enabled / brake disabled. Battery Type: Li-xx(Li-ion or LiPo) / Ni-xx(NiMh or NiCd). Low Voltage Protection Mode(Cutoff Mode): Gradually reduce the output power / Cutoff the output power. Low Voltage Cutoff Protection Threshold (Cutoff Threshold): low / medium / high. Start Mode: normal / soft / very soft. Timing: low / medium / high. Reset: resetall the programmable items totheir default settings.

2.4Full Protection Features:Low voltage cutoff protection / Over-heat protection / Throttle signal lost protection.

3Advantages

3.1Military standard capacitorof extreme low resistance increases the ability of prevention of unwanted RF noise during flying.

3.2Extreme low resistancePCB is helpful for getting a super current endurance capability.

3.3 Microprocessor uses separate voltage regulator IC, with good anti-jamming capability.