This E-Paper Raw panel uses SPI communication to easily add it to your projects and has a viewing angle of over 170, which provides clear visibility from almost any angle. It has a 296 x 160 resolution with red, black, yellow and white colours for sharp and clear visuals.

Without the need for a backlight, it saves on energy by continuing to keep the latest content you had put on there even when powered down, how handy! This means it will consume barely any power and the power will only be needed when it’s refreshing. Online development resources and a manual are included, with examples for Raspberry Pi, Jetson Nano, Arduino, and STM32.

Note: an e-Paper Raw Panel Driver HAT will be needed to run this display. You can find one in our store

Features

• No backlight, keeps displaying last content for a long time even when powered down
• Ultra-low power consumption, basically power is only required for refreshing
• Comes with online development resources and manual (driver board circuit diagram, examples for Raspberry Pi / Jetson Nano / RDK X3 / Arduino / STM32)

Specifications

Operating Voltage 3.3V Interface 3-wire SPI, 4-wire SPI Outline Dimensions 60.8 x 31.8 x 1.00 (mm) Display Size 48.10 x 26 (mm) Dot Pitch 0.1625 x 0.1625 (mm) Resolution 296 x 160 pixels Display Colour Red/Black/White/Yellow Greyscale 2 Full Refresh Time 20s Refresh Power <50mW Standby Current <0.01uA (almost none) Viewing angle >170

Resources

• Product Wiki
• Datasheet

Package Contents

• 1x 2.15″ E-Paper Raw Display Panel