Description:

2.8-inch SPI Touch Screen Module TFT Interface 240×320 display is big (2.8 diagonal) bright and colourful! 240320 pixels with individual RGB pixel control, this has way more resolution than a black and white 12864 display.

As a bonus, this display has a resistive touchscreen attached to it already so that you can detect finger presses anywhere on the screen. This display has a controller built into it with RAM buffering so that the microcontroller does almost no work.

The display can be used in two modes: 8-bit and SPI. In 8-bit mode, youll need 8 digital data lines and 4 or 5 digital control lines to read and write to the display (12 lines total). SPI mode requires only 5 pins (SPI data in, data out, clock, select, and d/c) but is slower than 8-bit mode. In addition, 4 pins are required for the touchscreen (2 digital, 2 analog).

This 2.8-inch SPI Touch Screen Module is packaged in an easy-to-use breakout board. One end has SPI connections, and the other has 8-bit connections. Both are 3-5V compliant with high-speed level shifters, so they can be used with any microcontroller. If you choose SPI mode, you can also display images using the onboard MicroSD card socket.

Specifications:

• Touch: Resistive
• Display Size: 2.8
• Size: 8.5 x 4.8cm
• Input Voltage (V): 3.3 to 5
• Display Driver IC: ILI9341
• Touch Driver IC: XPT2046
• Color Depth: 262K/65K
• Resolution : 240 x 320

Features:

• The display has a wideviewing angle
• Big display with good resolution
• It shows a color depth of 262K/65K
• Need at least 4 IOs from your MCU

Package Included:

• 1 x 2.8 Inch SPI TFT LCD Display
• 1 x StylusPen