SpecificationsBase casing:Al 7075Stator:0.15mm Nippon Steel silicon steelConfiguration:12N14PProp Adapter Shaft Thread:M5Shaft:SUS 420No.of Cells(Lipo):4-6SBolt Pattern:M2 (12X12mm)Bearings:Japanese NMB 7x3x3mmRotor:N52H arc magnetsWeight:21.01g with 16cm SR wiresWire AWG:24AWG 16cm lengthBell cap:Al 7075

ESC Current: 23.1A Thrust efficiency: 1.44 The inside of motor copper wire: 95.45 (Ambient temperature is 26 %C) 2005LA-2800KV Throttle: 100% RPM: 50958RPM 7512 HQ3X4X3 Triblade Valtaqe: 23.91 Input Power: 623.79W ESC Power: 367.291W

The motor specifications are as follows: ESC current is 26A, thrust efficiency reaches 1.2, and the internal copper wire temperature is approximately 107.49C (ambient temperature being 26C).

The alloy used in this motor is 1C4 titanium, which provides higher strength, more toughness, and increased impact resistance.

The motor features a Ni-Zh arc magnet and TUI oxygen-free enameled wire, which allows for a micro air gap design, resulting in low magnetic energy loss.

The motor utilizes an imported NMB bearing configuration, which ensures a longer service life, providing free and quiet operation even in high-temperature conditions.

The enameled wire used in this motor is a high-temperature-resistant and durable material, capable of withstanding extreme conditions during intense flights.

4S ESC 4S 24A Max power (W) 367.29 Propeller 3in Triblade Max Current (A) 23.10 Hipot test@5oov AC PASS Dynamic balance Impluse winding test PASS requirement standards LA 2005-3450KV Load Test Data Prop Throttle Valtage Current Thrust Input Power Thrust efficiency Copper wire 46mg.

The specifications for the motor are as follows:Inside temperature at 50C: 16.0C, humidity 6.10%, air pressure 24970Pa, and voltage 157.00V.Triblade configuration (3450KV):- Temperature: 70C- Humidity: 16.0%- Air pressure: 33804Pa- Voltage: 316.00V- Current: 204.80A- Efficiency: 1.54(Ambient temperature: 80C, humidity 16.0%, air pressure 38227Pa, voltage 411.00V, current 268.80A, efficiency 1.53)

The load test data for LA 2005-2800KV motor meets the required standards, including prop throttle voltage current thrust input power thrust efficiency, and copper wire temperature as follows:* 30C: Prop speed 24.00%, thrust 2.90N, input power 20811W, output power 118.00W, efficiency 1.70* 40C: Prop speed 24.00%, thrust 4.70N, input power 26094W, output power 186.00W, efficiency 1.65The inside temperature of the motor is approximately 50C, with a copper wire temperature of 80.1C.

The temperature and performance data for the LA 2005 motor are as follows:* 30C: Temperature 16.0%, thrust 3.00N, input power 11610W, output power 145.00W, efficiency 3.02* 40C: Temperature 16.0%, thrust 4.30N, input power 13262W, output power 207.00W, efficiency 3.01The inside temperature of the motor is approximately 50C, with a copper wire temperature of 104.5c.

The performance data for the LA 2005 motor at 50C is as follows: temperature 24.0%, thrust 3.40N, input power 14478W, output power 207.00W, efficiency 2.54.The copper wire temperature is approximately 98.7C.