• Detailed STEP-by-STEP high-quality video tutorial. You cannot go wrong with a line-following robot car anymore. Make the car in under 15 minutes.
• We have simplified the parts used and pre-soldered the L293D analogue pins, and DC motor wires to make it simple for assembly.

DESCRIPTION

• Detailed STEP-by-STEP high-quality video tutorial. You cannot go wrong with a line-following robot car anymore. Make the car in under 15 minutes.
• We have simplified the parts used and pre-soldered the L293D analogue pins, and DC motor wires to make it simple for assembly.
• The included battery holder has an ON-OFF switch with a DC jack, so forget about fitting a separate switch and save time.
• Download instructions about source code and circuit diagrams are provided with the kit.

PACKAGE INCLUDED

• 1 x UNO R3 Board with Cable
• 1 x 830Pt BreadBoard
• 1 x Prototype Shield
• 1 x 170Pt Mini Breadboard
• 4 x Push Button & Caps
• 1 x Resistor Color card
• 1 x ULN2003 Driver
• 1 x Stepper Motor
• 1 x Breadboard Power Supply
• 1 x IR Remote
• 1 x 9V Battery Plug with DC Jack
• 2 x Vibration Switch (Tilt)
• 1 x Flame Sensor
• 1 x DHT11 Sensor
• 3 x Photoresistor
• 1 x IR Receiver (TSOP)
• 1 x Potentiometer
• 1 x 1602 LCD
• 1 x Active Buzzer
• 1 x Passive Buzzer
• 1 x HC SR04 Ultrasonic
• 1 x IC 74HC595
• 1 x 1-Digit Seven Segment Display
• 1 x 4-Digit Seven Segment Display
• 1 x 8*8 Dot Matrix Display
• 10 x Resistor (220, 330, 10K, 1K each)
• 1 x Jumper Wire 65 Pcs
• 1 x RGB Module
• 5 x LED (RED, GREEN, BLUE each)
• 1 x 40 Pin Male Header
• 20 x Jumper Wires (F-F, M-M each)
• Plastic Box