The Tango 2 transparent shell, leave it as it is or paint it and let your creativity flow.

*If you have the Tango 2 with the old screen design, you can purchase the Nastalgia shell for you at the following LINK.

**Antenna sold separately.

View moreradio parts & accessoriesor moreTBS products.

Tango With The New Screen Design

• Due to the pandemic, we are no longer able to source the same screen we used since launch. Luckily, we found a replacement, however it requires us to modify the case a little to accommodate the new electronics.
• If you wish to purchase the plastic parts for the newer hardware, please pick [TANGO 2 NOSTALGIA SHELL (NEW SCREEN)] under product customization.
• If you are not sure which version you got, please compare it with the image below.

How To

For customizing purpose (paint job, hydro-dip, etc.), we left the led diffuser, speakers and buttons uninstalled.

BUTTONS AND DEFUSER

• Put it in place through the plastic pins.
• With your soldering iron, melt the pins down to hold the buttons down.

SPEAKER UNIT

• The speak unit on your existing case is held on with glue
• Carefully cut into the glue along the wall of the speaker unit with an exacto knife
• Pull out the speaker and rub off the leftover glue
• You can install the speaker to the new case with [SILICONE ADHESIVE]

OPENING THE HOUSING OF THE TANGO2

INCLUDES

• 1 x Top Shell
• 1 x Bottom Shell
• 2 x Momentary switch Buttons
• 1 x [Exit Menu Page] Buttons
• 1 x LED Diffuser
• 2 x Case Tags